中文|English
021-59546069
Product
Home  > Product  > Safety Devices
  • Safety Devices for Press Brake-DSP DSP LASER protects the pressbrake operator from the danger of crushing that can take place accidentally between the moving part of the machine and the fixed one.……
    • product introduction
    • technical parameter
    • Use case
    • DSP LASER protects the pressbrake operator from the danger of crushing that can take place accidentally between the moving part of the machine and the fixed one.The project idea used for this device is the one to fit out the moving pert of the pressbrake with a protection zone.
      This is a volume of suitable and special dimensions generated by DSP LASER and placed under the upper tool vertex at a higher distance than that the machine requires to stop.So the protection zone, that moves together with the mobile part because integral with it, advances the race of this one towards the fixed pert. An obstacle (for example the Operator fingers) when entering the protection zone. Is detected immediately causing consequently the interruption of the mobile part motion.



    • -Laser protection,Single  beam
      -The safety level is CAT.4 and SIL3
      -Detection Case protection degree: IP 65
      -Laser classification: class 1 M
      -Response time: 5 ms
      -Operating temperature 0°C  50°C
      -Mounted on the lower tool
      -Change Speed Point : 5mm + Stopping Space
      -The maximum protective distance is up to 15M
      -LED indicators show various states


    • APPLICATIONS


    Prev：Safety Device for Press Brake - DSP AP+MCS

    Next：none